How does the math work for Perception checks?How do I know which edition of Dungeons and Dragons (D&D) the books I'm looking at are for?How to roll perception checks for characters who aren't actively looking without arousing suspicion?Does passive perception supersede active perception?It seems like every skill check should always be made with advantage due to the 'Working Together' rules. Is this accurate?5E Trap/Ambush/Stealth Mechanics VS Passive Perception ConfusionPerception checks through a familiar's eyesHow does a perception check while flying work? Is there a min/max height to fly when scouting?Does D&D Damage math work the same as Normal Math?How does passive perception workWhat does a +20 modifier look like? Explaining to non-role playersHow does Bardic Inspiration work with Passive Perception?

Can disgust be a key component of horror?

Does Doodling or Improvising on the Piano Have Any Benefits?

Why is it that I can sometimes guess the next note?

What is the evidence for the "tyranny of the majority problem" in a direct democracy context?

Add big quotation marks inside my colorbox

Open a doc from terminal, but not by its name

Is there a way to get `mathscr' with lower case letters in pdfLaTeX?

Are Captain Marvel's powers affected by Thanos' actions in Infinity War

Pre-mixing cryogenic fuels and using only one fuel tank

Why is the "ls" command showing permissions of files in a FAT32 partition?

Invalid date error by date command

Mixing PEX brands

Calculate sum of polynomial roots

Can I say "fingers" when referring to toes?

Why is this estimator biased?

Redundant comparison & "if" before assignment

Does the Linux kernel need a file system to run?

When were female captains banned from Starfleet?

Using substitution ciphers to generate new alphabets in a novel

What happens if you are holding an Iron Flask with a demon inside and walk into an Antimagic Field?

Why can Carol Danvers change her suit colours in the first place?

How could a planet have erratic days?

Why Shazam when there is already Superman?

Electoral considerations aside, what are potential benefits, for the US, of policy changes proposed by the tweet recognizing Golan annexation?



How does the math work for Perception checks?


How do I know which edition of Dungeons and Dragons (D&D) the books I'm looking at are for?How to roll perception checks for characters who aren't actively looking without arousing suspicion?Does passive perception supersede active perception?It seems like every skill check should always be made with advantage due to the 'Working Together' rules. Is this accurate?5E Trap/Ambush/Stealth Mechanics VS Passive Perception ConfusionPerception checks through a familiar's eyesHow does a perception check while flying work? Is there a min/max height to fly when scouting?Does D&D Damage math work the same as Normal Math?How does passive perception workWhat does a +20 modifier look like? Explaining to non-role playersHow does Bardic Inspiration work with Passive Perception?













6












$begingroup$


Please forgive me, it's been over 40+ years since I've played D&D and just now trying to reboot the changes. Can someone briefly explain Perception check math?



Assume I'm a 5 year old or an idiot, whichever comes first in your mind.



If a character has a Wisdom of 10 and the DM says "roll a Perception check"...
The character then rolls a 1d20 with the hopes of what number? Higher than or lower than 10? Or is it a number only the DM knows about the area/monster/etc.?



Follow-up question:

If a character has a high Wisdom, wouldn't the P.C. be easier to achieve? Assuming a lower roll is easier than a higher roll (yes?).










share|improve this question









New contributor




Mournblade is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.







$endgroup$











  • $begingroup$
    An important question! Unfortunately, it is the policy here not to answer edition specific questions until the person asking specifies the edition even if we think we know which edition you mean. I'm sure plenty of people will be happy to answer once this is clarified. The current edition of D&D is 5e.
    $endgroup$
    – Benjamin Olson
    3 hours ago










  • $begingroup$
    Welcome! When you get a chance you can edit the edition either into the body of the post or as a tag, by writing something like adnd-2e or dnd-5e into the list of tags. If you can't find anywhere on the books where it says that (like I couldn't when I came back to D&D after a 20+ year hiatus) feel free to pop into Role-playing Games Chat and people there should be able to give you a hand. Or this visual guide to the editions' corebooks might help.
    $endgroup$
    – nitsua60
    3 hours ago







  • 2




    $begingroup$
    Thank you Purple Monkey
    $endgroup$
    – Mournblade
    2 hours ago










  • $begingroup$
    Welcome back. I started with 3 little brown books in 1975. Here's a link to the free basic rules if that helps. I also "get" your chosen site name. :) Please ping me in chat whenever, I'll be happy to help.
    $endgroup$
    – KorvinStarmast
    1 hour ago
















6












$begingroup$


Please forgive me, it's been over 40+ years since I've played D&D and just now trying to reboot the changes. Can someone briefly explain Perception check math?



Assume I'm a 5 year old or an idiot, whichever comes first in your mind.



If a character has a Wisdom of 10 and the DM says "roll a Perception check"...
The character then rolls a 1d20 with the hopes of what number? Higher than or lower than 10? Or is it a number only the DM knows about the area/monster/etc.?



Follow-up question:

If a character has a high Wisdom, wouldn't the P.C. be easier to achieve? Assuming a lower roll is easier than a higher roll (yes?).










share|improve this question









New contributor




Mournblade is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.







$endgroup$











  • $begingroup$
    An important question! Unfortunately, it is the policy here not to answer edition specific questions until the person asking specifies the edition even if we think we know which edition you mean. I'm sure plenty of people will be happy to answer once this is clarified. The current edition of D&D is 5e.
    $endgroup$
    – Benjamin Olson
    3 hours ago










  • $begingroup$
    Welcome! When you get a chance you can edit the edition either into the body of the post or as a tag, by writing something like adnd-2e or dnd-5e into the list of tags. If you can't find anywhere on the books where it says that (like I couldn't when I came back to D&D after a 20+ year hiatus) feel free to pop into Role-playing Games Chat and people there should be able to give you a hand. Or this visual guide to the editions' corebooks might help.
    $endgroup$
    – nitsua60
    3 hours ago







  • 2




    $begingroup$
    Thank you Purple Monkey
    $endgroup$
    – Mournblade
    2 hours ago










  • $begingroup$
    Welcome back. I started with 3 little brown books in 1975. Here's a link to the free basic rules if that helps. I also "get" your chosen site name. :) Please ping me in chat whenever, I'll be happy to help.
    $endgroup$
    – KorvinStarmast
    1 hour ago














6












6








6





$begingroup$


Please forgive me, it's been over 40+ years since I've played D&D and just now trying to reboot the changes. Can someone briefly explain Perception check math?



Assume I'm a 5 year old or an idiot, whichever comes first in your mind.



If a character has a Wisdom of 10 and the DM says "roll a Perception check"...
The character then rolls a 1d20 with the hopes of what number? Higher than or lower than 10? Or is it a number only the DM knows about the area/monster/etc.?



Follow-up question:

If a character has a high Wisdom, wouldn't the P.C. be easier to achieve? Assuming a lower roll is easier than a higher roll (yes?).










share|improve this question









New contributor




Mournblade is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.







$endgroup$




Please forgive me, it's been over 40+ years since I've played D&D and just now trying to reboot the changes. Can someone briefly explain Perception check math?



Assume I'm a 5 year old or an idiot, whichever comes first in your mind.



If a character has a Wisdom of 10 and the DM says "roll a Perception check"...
The character then rolls a 1d20 with the hopes of what number? Higher than or lower than 10? Or is it a number only the DM knows about the area/monster/etc.?



Follow-up question:

If a character has a high Wisdom, wouldn't the P.C. be easier to achieve? Assuming a lower roll is easier than a higher roll (yes?).







dnd-5e skills perception






share|improve this question









New contributor




Mournblade is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.











share|improve this question









New contributor




Mournblade is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.









share|improve this question




share|improve this question








edited 1 hour ago









V2Blast

25.4k486156




25.4k486156






New contributor




Mournblade is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.









asked 3 hours ago









MournbladeMournblade

312




312




New contributor




Mournblade is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.





New contributor





Mournblade is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.






Mournblade is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.











  • $begingroup$
    An important question! Unfortunately, it is the policy here not to answer edition specific questions until the person asking specifies the edition even if we think we know which edition you mean. I'm sure plenty of people will be happy to answer once this is clarified. The current edition of D&D is 5e.
    $endgroup$
    – Benjamin Olson
    3 hours ago










  • $begingroup$
    Welcome! When you get a chance you can edit the edition either into the body of the post or as a tag, by writing something like adnd-2e or dnd-5e into the list of tags. If you can't find anywhere on the books where it says that (like I couldn't when I came back to D&D after a 20+ year hiatus) feel free to pop into Role-playing Games Chat and people there should be able to give you a hand. Or this visual guide to the editions' corebooks might help.
    $endgroup$
    – nitsua60
    3 hours ago







  • 2




    $begingroup$
    Thank you Purple Monkey
    $endgroup$
    – Mournblade
    2 hours ago










  • $begingroup$
    Welcome back. I started with 3 little brown books in 1975. Here's a link to the free basic rules if that helps. I also "get" your chosen site name. :) Please ping me in chat whenever, I'll be happy to help.
    $endgroup$
    – KorvinStarmast
    1 hour ago

















  • $begingroup$
    An important question! Unfortunately, it is the policy here not to answer edition specific questions until the person asking specifies the edition even if we think we know which edition you mean. I'm sure plenty of people will be happy to answer once this is clarified. The current edition of D&D is 5e.
    $endgroup$
    – Benjamin Olson
    3 hours ago










  • $begingroup$
    Welcome! When you get a chance you can edit the edition either into the body of the post or as a tag, by writing something like adnd-2e or dnd-5e into the list of tags. If you can't find anywhere on the books where it says that (like I couldn't when I came back to D&D after a 20+ year hiatus) feel free to pop into Role-playing Games Chat and people there should be able to give you a hand. Or this visual guide to the editions' corebooks might help.
    $endgroup$
    – nitsua60
    3 hours ago







  • 2




    $begingroup$
    Thank you Purple Monkey
    $endgroup$
    – Mournblade
    2 hours ago










  • $begingroup$
    Welcome back. I started with 3 little brown books in 1975. Here's a link to the free basic rules if that helps. I also "get" your chosen site name. :) Please ping me in chat whenever, I'll be happy to help.
    $endgroup$
    – KorvinStarmast
    1 hour ago
















$begingroup$
An important question! Unfortunately, it is the policy here not to answer edition specific questions until the person asking specifies the edition even if we think we know which edition you mean. I'm sure plenty of people will be happy to answer once this is clarified. The current edition of D&D is 5e.
$endgroup$
– Benjamin Olson
3 hours ago




$begingroup$
An important question! Unfortunately, it is the policy here not to answer edition specific questions until the person asking specifies the edition even if we think we know which edition you mean. I'm sure plenty of people will be happy to answer once this is clarified. The current edition of D&D is 5e.
$endgroup$
– Benjamin Olson
3 hours ago












$begingroup$
Welcome! When you get a chance you can edit the edition either into the body of the post or as a tag, by writing something like adnd-2e or dnd-5e into the list of tags. If you can't find anywhere on the books where it says that (like I couldn't when I came back to D&D after a 20+ year hiatus) feel free to pop into Role-playing Games Chat and people there should be able to give you a hand. Or this visual guide to the editions' corebooks might help.
$endgroup$
– nitsua60
3 hours ago





$begingroup$
Welcome! When you get a chance you can edit the edition either into the body of the post or as a tag, by writing something like adnd-2e or dnd-5e into the list of tags. If you can't find anywhere on the books where it says that (like I couldn't when I came back to D&D after a 20+ year hiatus) feel free to pop into Role-playing Games Chat and people there should be able to give you a hand. Or this visual guide to the editions' corebooks might help.
$endgroup$
– nitsua60
3 hours ago





2




2




$begingroup$
Thank you Purple Monkey
$endgroup$
– Mournblade
2 hours ago




$begingroup$
Thank you Purple Monkey
$endgroup$
– Mournblade
2 hours ago












$begingroup$
Welcome back. I started with 3 little brown books in 1975. Here's a link to the free basic rules if that helps. I also "get" your chosen site name. :) Please ping me in chat whenever, I'll be happy to help.
$endgroup$
– KorvinStarmast
1 hour ago





$begingroup$
Welcome back. I started with 3 little brown books in 1975. Here's a link to the free basic rules if that helps. I also "get" your chosen site name. :) Please ping me in chat whenever, I'll be happy to help.
$endgroup$
– KorvinStarmast
1 hour ago











3 Answers
3






active

oldest

votes


















4












$begingroup$

You may wish to refer to the introductory sections of the PHB, also contained in the freely available Basic Rules, which describe the core gameplay mechanics - which are rather different to the D&D you're used to if you last played forty years ago. Tempting as it may be to dive in at the deep end, you might be better off setting aside everything you remember from the games you played before and starting at the very beginning with fresh eyes.



As the How To Play section of the Basic Rules describes making ability checks, attack rolls, and saving throws (the three main kinds of d20 roll, of which making a "Perception check" would be a wisdom-based ability check):




1. Roll the die and add a modifier.



Roll a d20 and add the relevant modifier. This is typically the modifier derived from one of the six ability scores, and it sometimes includes a proficiency bonus to reflect a character’s particular skill. (See "Step-By-Step Characters" for details on each ability and how to determine an ability’s modifier.)



2. Apply circumstantial bonuses and penalties.



A class feature, a spell, a particular circumstance, or some other effect might give a bonus or penalty to the check.



3. Compare the total to a target number.



If the total equals or exceeds the target number, the ability check, attack roll, or saving throw is a success. Otherwise, it’s a failure. The DM is usually the one who determines target numbers and tells players whether their ability checks, attack rolls, and saving throws succeed or fail.



The target number for an ability check or a saving throw is called a Difficulty Class (DC). The target number for an attack roll is called an Armor Class (AC).



This simple rule governs the resolution of most tasks in D&D play. "Using Ability Scores" provides more detailed rules for using the d20 in the game.







share|improve this answer









$endgroup$




















    3












    $begingroup$

    The DM determines the DC, the PC adds their Wisdom bonus and sometimes Proficiency bonus



    Step by step:




    • DM calls for a Wisdom (Perception) check (this is an ability check).



      • The Difficulty Class (DC) is the minimum number that the PC needs to get in order to pass the check.

      • An example medium DC = 10, a hard DC = 15, a very hard DC = 20, etc.

      • The DM should already know what the DC of the check is. They may tell the PC or keep it secret, at their discretion.


    • Player Character (PC) rolls 1d20.


    • PC adds their ability modifier (Wisdom for Perception), in this case 0 due to their Wisdom score of 10.


    • If the PC is proficient in Perception, they add their Proficiency bonus (+2 at level 1, it increases as the PC gains levels).


    • The total result is told to the DM, who tells the PC if they pass or fail, and what happens next.


    The calculation is: 1d20 + Ability Score Modifier (Wisdom) + Proficiency bonus (if proficient)



    Since a higher Wisdom score will give you a higher modifier it makes the check easier. Likewise, if the DC is lower the odds of passing it are higher.






    share|improve this answer











    $endgroup$








    • 1




      $begingroup$
      "The DM should already know what the Difficulty Class (DC) of the check is." after decades of not playing, and last laying with edition that didn't have checks as we know them now, it would be helpful to explain DC in a simpler way, like "Difficulty Class (DC) - minimum number you need to roll to succeed". You never actually said that higher = better, and question shows it is not obvious.
      $endgroup$
      – Mołot
      2 hours ago






    • 1




      $begingroup$
      @Mołot Is that better?
      $endgroup$
      – GreySage
      2 hours ago


















    -1












    $begingroup$

    Short Answer:



    For any skill based ability check the player tells the DM what he wants to try to do, the DM then decides on the appropriate skill or ability and she sets a (usually secret) number, the DC. The player then rolls a 20-sided die to meet or exceed that number, adding his character’s ability based modifier and (if you are proficient in the skill) proficiency based modifier for that skill to the number he rolls.



    So you add d20 roll + ability modifier + proficiency modifier (if you are proficient in the skill)



    You will usually have the complete modifier for a skill written on your character sheet so that you don't have to think about it too much while playing and just need to adjust it when you reach certain character levels or increase ability scores. So it should really just be a matter of rolling the die, adding a number to it, and telling the DM what you got.



    Details:



    The Number (DC)



    Based on how the DM evaluates the difficulty, she sets a number called the DC. Because this is a game where you can do anything and the DM has to adjust things on the fly, this is usually a fairly arbitrary number based on “what feels reasonable” to them, so you just have to trust that your DM is picking a reasonable one as fairly and carefully as they can. The most typical numbers set by most DMs are probably 5, 10, 15, 20, and 25.



    Some DMs have more elaborate systems for determining the number. If you are playing a published campaign it is also possible that the authors of that have specified DCs for some situations. There are also times when it will be a “contested roll” against another creature’s skill based ability roll. For perception this is often the case when there is a creature using stealth that you might perceive; your roll would have to beat theirs.



    After you succeed or fail on the roll the DM may or may not tell you what the DC was (or whether you succeeded or failed) at her discretion.



    Roll and Modifier



    The DM calls for a roll and specifies what skill you should be using. Each skill has an associated ability (for perception it is Wisdom) and you will get a modifier from this based on whether your ability score is lower, equal to, or higher than ten. For every 2 below ten you get a -1 modifier and for each 2 above you get a +1 modifier. If you have a 10 there is no modifier. So if you have a Wisdom score of 14, for example you would have a +2 modifier.



    Each character also has proficiencies in certain skills based on character creation decisions (background, class, and race). If you are proficient in a skill you get to add your proficiency modifier as well. The proficiency modifier is based on your character level. At level 1 your proficiency is 2, and it increases by 1 every few levels.



    So if a level 1 character with a Wisdom of 12 and proficiency in the perception skill made a perception roll they would add 1 to the roll for ability and 2 for skill proficiency to their total score. So if they rolled an 11 it would count as 14. If the DC was 14 or lower they succeed. If it was 15 or higher they fail.



    Occasionally the DM will have you make a “straight ability check” when no skill quite fits for what you are doing, in which case you just roll and add the ability modifier without worrying about skills.



    This is all much easier once you have your character sheet set up correctly as it will tell you the total to add for each skill.



    Various classes have special rules about skill rolls (particularly Rogues and Bards), but you’ll learn those as you go if they apply.



    20s and 1s



    A very common house rule (possibly the most common of any kind) is that a natural (before adding modifiers) roll of 20 on the die is an automatic success, and a roll of 1 is an automatic failure. At many tables 20 often means a particularly spectacular success and 1 a particularly spectacular failure. But, technically, according to official rules 1s and 20s only have effects like this for attacks and death saving throws.



    Passive Perception



    In some situations the DM will use your “passive perception” for whether you notice something without actively looking for things. This number will equal 10 + the ability and proficiency modifiers. As long as your DM knows what your passive perception is you shouldn’t have to worry about it.






    share|improve this answer











    $endgroup$








    • 1




      $begingroup$
      Youve got a lot of excellent and accurate information, but you need to cite your references for each point.
      $endgroup$
      – NautArch
      1 hour ago










    • $begingroup$
      @NautArch In this case that seems roughly on the level of needing to cite page 1 of the PHB for the proposition that "Dungeons and Dragons is a roleplaying game", but I'll see what I can do.
      $endgroup$
      – Benjamin Olson
      1 hour ago










    Your Answer





    StackExchange.ifUsing("editor", function ()
    return StackExchange.using("mathjaxEditing", function ()
    StackExchange.MarkdownEditor.creationCallbacks.add(function (editor, postfix)
    StackExchange.mathjaxEditing.prepareWmdForMathJax(editor, postfix, [["\$", "\$"]]);
    );
    );
    , "mathjax-editing");

    StackExchange.ready(function()
    var channelOptions =
    tags: "".split(" "),
    id: "122"
    ;
    initTagRenderer("".split(" "), "".split(" "), channelOptions);

    StackExchange.using("externalEditor", function()
    // Have to fire editor after snippets, if snippets enabled
    if (StackExchange.settings.snippets.snippetsEnabled)
    StackExchange.using("snippets", function()
    createEditor();
    );

    else
    createEditor();

    );

    function createEditor()
    StackExchange.prepareEditor(
    heartbeatType: 'answer',
    autoActivateHeartbeat: false,
    convertImagesToLinks: false,
    noModals: true,
    showLowRepImageUploadWarning: true,
    reputationToPostImages: null,
    bindNavPrevention: true,
    postfix: "",
    imageUploader:
    brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
    contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
    allowUrls: true
    ,
    noCode: true, onDemand: true,
    discardSelector: ".discard-answer"
    ,immediatelyShowMarkdownHelp:true
    );



    );






    Mournblade is a new contributor. Be nice, and check out our Code of Conduct.









    draft saved

    draft discarded


















    StackExchange.ready(
    function ()
    StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2frpg.stackexchange.com%2fquestions%2f143763%2fhow-does-the-math-work-for-perception-checks%23new-answer', 'question_page');

    );

    Post as a guest















    Required, but never shown

























    3 Answers
    3






    active

    oldest

    votes








    3 Answers
    3






    active

    oldest

    votes









    active

    oldest

    votes






    active

    oldest

    votes









    4












    $begingroup$

    You may wish to refer to the introductory sections of the PHB, also contained in the freely available Basic Rules, which describe the core gameplay mechanics - which are rather different to the D&D you're used to if you last played forty years ago. Tempting as it may be to dive in at the deep end, you might be better off setting aside everything you remember from the games you played before and starting at the very beginning with fresh eyes.



    As the How To Play section of the Basic Rules describes making ability checks, attack rolls, and saving throws (the three main kinds of d20 roll, of which making a "Perception check" would be a wisdom-based ability check):




    1. Roll the die and add a modifier.



    Roll a d20 and add the relevant modifier. This is typically the modifier derived from one of the six ability scores, and it sometimes includes a proficiency bonus to reflect a character’s particular skill. (See "Step-By-Step Characters" for details on each ability and how to determine an ability’s modifier.)



    2. Apply circumstantial bonuses and penalties.



    A class feature, a spell, a particular circumstance, or some other effect might give a bonus or penalty to the check.



    3. Compare the total to a target number.



    If the total equals or exceeds the target number, the ability check, attack roll, or saving throw is a success. Otherwise, it’s a failure. The DM is usually the one who determines target numbers and tells players whether their ability checks, attack rolls, and saving throws succeed or fail.



    The target number for an ability check or a saving throw is called a Difficulty Class (DC). The target number for an attack roll is called an Armor Class (AC).



    This simple rule governs the resolution of most tasks in D&D play. "Using Ability Scores" provides more detailed rules for using the d20 in the game.







    share|improve this answer









    $endgroup$

















      4












      $begingroup$

      You may wish to refer to the introductory sections of the PHB, also contained in the freely available Basic Rules, which describe the core gameplay mechanics - which are rather different to the D&D you're used to if you last played forty years ago. Tempting as it may be to dive in at the deep end, you might be better off setting aside everything you remember from the games you played before and starting at the very beginning with fresh eyes.



      As the How To Play section of the Basic Rules describes making ability checks, attack rolls, and saving throws (the three main kinds of d20 roll, of which making a "Perception check" would be a wisdom-based ability check):




      1. Roll the die and add a modifier.



      Roll a d20 and add the relevant modifier. This is typically the modifier derived from one of the six ability scores, and it sometimes includes a proficiency bonus to reflect a character’s particular skill. (See "Step-By-Step Characters" for details on each ability and how to determine an ability’s modifier.)



      2. Apply circumstantial bonuses and penalties.



      A class feature, a spell, a particular circumstance, or some other effect might give a bonus or penalty to the check.



      3. Compare the total to a target number.



      If the total equals or exceeds the target number, the ability check, attack roll, or saving throw is a success. Otherwise, it’s a failure. The DM is usually the one who determines target numbers and tells players whether their ability checks, attack rolls, and saving throws succeed or fail.



      The target number for an ability check or a saving throw is called a Difficulty Class (DC). The target number for an attack roll is called an Armor Class (AC).



      This simple rule governs the resolution of most tasks in D&D play. "Using Ability Scores" provides more detailed rules for using the d20 in the game.







      share|improve this answer









      $endgroup$















        4












        4








        4





        $begingroup$

        You may wish to refer to the introductory sections of the PHB, also contained in the freely available Basic Rules, which describe the core gameplay mechanics - which are rather different to the D&D you're used to if you last played forty years ago. Tempting as it may be to dive in at the deep end, you might be better off setting aside everything you remember from the games you played before and starting at the very beginning with fresh eyes.



        As the How To Play section of the Basic Rules describes making ability checks, attack rolls, and saving throws (the three main kinds of d20 roll, of which making a "Perception check" would be a wisdom-based ability check):




        1. Roll the die and add a modifier.



        Roll a d20 and add the relevant modifier. This is typically the modifier derived from one of the six ability scores, and it sometimes includes a proficiency bonus to reflect a character’s particular skill. (See "Step-By-Step Characters" for details on each ability and how to determine an ability’s modifier.)



        2. Apply circumstantial bonuses and penalties.



        A class feature, a spell, a particular circumstance, or some other effect might give a bonus or penalty to the check.



        3. Compare the total to a target number.



        If the total equals or exceeds the target number, the ability check, attack roll, or saving throw is a success. Otherwise, it’s a failure. The DM is usually the one who determines target numbers and tells players whether their ability checks, attack rolls, and saving throws succeed or fail.



        The target number for an ability check or a saving throw is called a Difficulty Class (DC). The target number for an attack roll is called an Armor Class (AC).



        This simple rule governs the resolution of most tasks in D&D play. "Using Ability Scores" provides more detailed rules for using the d20 in the game.







        share|improve this answer









        $endgroup$



        You may wish to refer to the introductory sections of the PHB, also contained in the freely available Basic Rules, which describe the core gameplay mechanics - which are rather different to the D&D you're used to if you last played forty years ago. Tempting as it may be to dive in at the deep end, you might be better off setting aside everything you remember from the games you played before and starting at the very beginning with fresh eyes.



        As the How To Play section of the Basic Rules describes making ability checks, attack rolls, and saving throws (the three main kinds of d20 roll, of which making a "Perception check" would be a wisdom-based ability check):




        1. Roll the die and add a modifier.



        Roll a d20 and add the relevant modifier. This is typically the modifier derived from one of the six ability scores, and it sometimes includes a proficiency bonus to reflect a character’s particular skill. (See "Step-By-Step Characters" for details on each ability and how to determine an ability’s modifier.)



        2. Apply circumstantial bonuses and penalties.



        A class feature, a spell, a particular circumstance, or some other effect might give a bonus or penalty to the check.



        3. Compare the total to a target number.



        If the total equals or exceeds the target number, the ability check, attack roll, or saving throw is a success. Otherwise, it’s a failure. The DM is usually the one who determines target numbers and tells players whether their ability checks, attack rolls, and saving throws succeed or fail.



        The target number for an ability check or a saving throw is called a Difficulty Class (DC). The target number for an attack roll is called an Armor Class (AC).



        This simple rule governs the resolution of most tasks in D&D play. "Using Ability Scores" provides more detailed rules for using the d20 in the game.








        share|improve this answer












        share|improve this answer



        share|improve this answer










        answered 1 hour ago









        CarcerCarcer

        26.2k479139




        26.2k479139























            3












            $begingroup$

            The DM determines the DC, the PC adds their Wisdom bonus and sometimes Proficiency bonus



            Step by step:




            • DM calls for a Wisdom (Perception) check (this is an ability check).



              • The Difficulty Class (DC) is the minimum number that the PC needs to get in order to pass the check.

              • An example medium DC = 10, a hard DC = 15, a very hard DC = 20, etc.

              • The DM should already know what the DC of the check is. They may tell the PC or keep it secret, at their discretion.


            • Player Character (PC) rolls 1d20.


            • PC adds their ability modifier (Wisdom for Perception), in this case 0 due to their Wisdom score of 10.


            • If the PC is proficient in Perception, they add their Proficiency bonus (+2 at level 1, it increases as the PC gains levels).


            • The total result is told to the DM, who tells the PC if they pass or fail, and what happens next.


            The calculation is: 1d20 + Ability Score Modifier (Wisdom) + Proficiency bonus (if proficient)



            Since a higher Wisdom score will give you a higher modifier it makes the check easier. Likewise, if the DC is lower the odds of passing it are higher.






            share|improve this answer











            $endgroup$








            • 1




              $begingroup$
              "The DM should already know what the Difficulty Class (DC) of the check is." after decades of not playing, and last laying with edition that didn't have checks as we know them now, it would be helpful to explain DC in a simpler way, like "Difficulty Class (DC) - minimum number you need to roll to succeed". You never actually said that higher = better, and question shows it is not obvious.
              $endgroup$
              – Mołot
              2 hours ago






            • 1




              $begingroup$
              @Mołot Is that better?
              $endgroup$
              – GreySage
              2 hours ago















            3












            $begingroup$

            The DM determines the DC, the PC adds their Wisdom bonus and sometimes Proficiency bonus



            Step by step:




            • DM calls for a Wisdom (Perception) check (this is an ability check).



              • The Difficulty Class (DC) is the minimum number that the PC needs to get in order to pass the check.

              • An example medium DC = 10, a hard DC = 15, a very hard DC = 20, etc.

              • The DM should already know what the DC of the check is. They may tell the PC or keep it secret, at their discretion.


            • Player Character (PC) rolls 1d20.


            • PC adds their ability modifier (Wisdom for Perception), in this case 0 due to their Wisdom score of 10.


            • If the PC is proficient in Perception, they add their Proficiency bonus (+2 at level 1, it increases as the PC gains levels).


            • The total result is told to the DM, who tells the PC if they pass or fail, and what happens next.


            The calculation is: 1d20 + Ability Score Modifier (Wisdom) + Proficiency bonus (if proficient)



            Since a higher Wisdom score will give you a higher modifier it makes the check easier. Likewise, if the DC is lower the odds of passing it are higher.






            share|improve this answer











            $endgroup$








            • 1




              $begingroup$
              "The DM should already know what the Difficulty Class (DC) of the check is." after decades of not playing, and last laying with edition that didn't have checks as we know them now, it would be helpful to explain DC in a simpler way, like "Difficulty Class (DC) - minimum number you need to roll to succeed". You never actually said that higher = better, and question shows it is not obvious.
              $endgroup$
              – Mołot
              2 hours ago






            • 1




              $begingroup$
              @Mołot Is that better?
              $endgroup$
              – GreySage
              2 hours ago













            3












            3








            3





            $begingroup$

            The DM determines the DC, the PC adds their Wisdom bonus and sometimes Proficiency bonus



            Step by step:




            • DM calls for a Wisdom (Perception) check (this is an ability check).



              • The Difficulty Class (DC) is the minimum number that the PC needs to get in order to pass the check.

              • An example medium DC = 10, a hard DC = 15, a very hard DC = 20, etc.

              • The DM should already know what the DC of the check is. They may tell the PC or keep it secret, at their discretion.


            • Player Character (PC) rolls 1d20.


            • PC adds their ability modifier (Wisdom for Perception), in this case 0 due to their Wisdom score of 10.


            • If the PC is proficient in Perception, they add their Proficiency bonus (+2 at level 1, it increases as the PC gains levels).


            • The total result is told to the DM, who tells the PC if they pass or fail, and what happens next.


            The calculation is: 1d20 + Ability Score Modifier (Wisdom) + Proficiency bonus (if proficient)



            Since a higher Wisdom score will give you a higher modifier it makes the check easier. Likewise, if the DC is lower the odds of passing it are higher.






            share|improve this answer











            $endgroup$



            The DM determines the DC, the PC adds their Wisdom bonus and sometimes Proficiency bonus



            Step by step:




            • DM calls for a Wisdom (Perception) check (this is an ability check).



              • The Difficulty Class (DC) is the minimum number that the PC needs to get in order to pass the check.

              • An example medium DC = 10, a hard DC = 15, a very hard DC = 20, etc.

              • The DM should already know what the DC of the check is. They may tell the PC or keep it secret, at their discretion.


            • Player Character (PC) rolls 1d20.


            • PC adds their ability modifier (Wisdom for Perception), in this case 0 due to their Wisdom score of 10.


            • If the PC is proficient in Perception, they add their Proficiency bonus (+2 at level 1, it increases as the PC gains levels).


            • The total result is told to the DM, who tells the PC if they pass or fail, and what happens next.


            The calculation is: 1d20 + Ability Score Modifier (Wisdom) + Proficiency bonus (if proficient)



            Since a higher Wisdom score will give you a higher modifier it makes the check easier. Likewise, if the DC is lower the odds of passing it are higher.







            share|improve this answer














            share|improve this answer



            share|improve this answer








            edited 2 hours ago

























            answered 3 hours ago









            GreySageGreySage

            15.8k45397




            15.8k45397







            • 1




              $begingroup$
              "The DM should already know what the Difficulty Class (DC) of the check is." after decades of not playing, and last laying with edition that didn't have checks as we know them now, it would be helpful to explain DC in a simpler way, like "Difficulty Class (DC) - minimum number you need to roll to succeed". You never actually said that higher = better, and question shows it is not obvious.
              $endgroup$
              – Mołot
              2 hours ago






            • 1




              $begingroup$
              @Mołot Is that better?
              $endgroup$
              – GreySage
              2 hours ago












            • 1




              $begingroup$
              "The DM should already know what the Difficulty Class (DC) of the check is." after decades of not playing, and last laying with edition that didn't have checks as we know them now, it would be helpful to explain DC in a simpler way, like "Difficulty Class (DC) - minimum number you need to roll to succeed". You never actually said that higher = better, and question shows it is not obvious.
              $endgroup$
              – Mołot
              2 hours ago






            • 1




              $begingroup$
              @Mołot Is that better?
              $endgroup$
              – GreySage
              2 hours ago







            1




            1




            $begingroup$
            "The DM should already know what the Difficulty Class (DC) of the check is." after decades of not playing, and last laying with edition that didn't have checks as we know them now, it would be helpful to explain DC in a simpler way, like "Difficulty Class (DC) - minimum number you need to roll to succeed". You never actually said that higher = better, and question shows it is not obvious.
            $endgroup$
            – Mołot
            2 hours ago




            $begingroup$
            "The DM should already know what the Difficulty Class (DC) of the check is." after decades of not playing, and last laying with edition that didn't have checks as we know them now, it would be helpful to explain DC in a simpler way, like "Difficulty Class (DC) - minimum number you need to roll to succeed". You never actually said that higher = better, and question shows it is not obvious.
            $endgroup$
            – Mołot
            2 hours ago




            1




            1




            $begingroup$
            @Mołot Is that better?
            $endgroup$
            – GreySage
            2 hours ago




            $begingroup$
            @Mołot Is that better?
            $endgroup$
            – GreySage
            2 hours ago











            -1












            $begingroup$

            Short Answer:



            For any skill based ability check the player tells the DM what he wants to try to do, the DM then decides on the appropriate skill or ability and she sets a (usually secret) number, the DC. The player then rolls a 20-sided die to meet or exceed that number, adding his character’s ability based modifier and (if you are proficient in the skill) proficiency based modifier for that skill to the number he rolls.



            So you add d20 roll + ability modifier + proficiency modifier (if you are proficient in the skill)



            You will usually have the complete modifier for a skill written on your character sheet so that you don't have to think about it too much while playing and just need to adjust it when you reach certain character levels or increase ability scores. So it should really just be a matter of rolling the die, adding a number to it, and telling the DM what you got.



            Details:



            The Number (DC)



            Based on how the DM evaluates the difficulty, she sets a number called the DC. Because this is a game where you can do anything and the DM has to adjust things on the fly, this is usually a fairly arbitrary number based on “what feels reasonable” to them, so you just have to trust that your DM is picking a reasonable one as fairly and carefully as they can. The most typical numbers set by most DMs are probably 5, 10, 15, 20, and 25.



            Some DMs have more elaborate systems for determining the number. If you are playing a published campaign it is also possible that the authors of that have specified DCs for some situations. There are also times when it will be a “contested roll” against another creature’s skill based ability roll. For perception this is often the case when there is a creature using stealth that you might perceive; your roll would have to beat theirs.



            After you succeed or fail on the roll the DM may or may not tell you what the DC was (or whether you succeeded or failed) at her discretion.



            Roll and Modifier



            The DM calls for a roll and specifies what skill you should be using. Each skill has an associated ability (for perception it is Wisdom) and you will get a modifier from this based on whether your ability score is lower, equal to, or higher than ten. For every 2 below ten you get a -1 modifier and for each 2 above you get a +1 modifier. If you have a 10 there is no modifier. So if you have a Wisdom score of 14, for example you would have a +2 modifier.



            Each character also has proficiencies in certain skills based on character creation decisions (background, class, and race). If you are proficient in a skill you get to add your proficiency modifier as well. The proficiency modifier is based on your character level. At level 1 your proficiency is 2, and it increases by 1 every few levels.



            So if a level 1 character with a Wisdom of 12 and proficiency in the perception skill made a perception roll they would add 1 to the roll for ability and 2 for skill proficiency to their total score. So if they rolled an 11 it would count as 14. If the DC was 14 or lower they succeed. If it was 15 or higher they fail.



            Occasionally the DM will have you make a “straight ability check” when no skill quite fits for what you are doing, in which case you just roll and add the ability modifier without worrying about skills.



            This is all much easier once you have your character sheet set up correctly as it will tell you the total to add for each skill.



            Various classes have special rules about skill rolls (particularly Rogues and Bards), but you’ll learn those as you go if they apply.



            20s and 1s



            A very common house rule (possibly the most common of any kind) is that a natural (before adding modifiers) roll of 20 on the die is an automatic success, and a roll of 1 is an automatic failure. At many tables 20 often means a particularly spectacular success and 1 a particularly spectacular failure. But, technically, according to official rules 1s and 20s only have effects like this for attacks and death saving throws.



            Passive Perception



            In some situations the DM will use your “passive perception” for whether you notice something without actively looking for things. This number will equal 10 + the ability and proficiency modifiers. As long as your DM knows what your passive perception is you shouldn’t have to worry about it.






            share|improve this answer











            $endgroup$








            • 1




              $begingroup$
              Youve got a lot of excellent and accurate information, but you need to cite your references for each point.
              $endgroup$
              – NautArch
              1 hour ago










            • $begingroup$
              @NautArch In this case that seems roughly on the level of needing to cite page 1 of the PHB for the proposition that "Dungeons and Dragons is a roleplaying game", but I'll see what I can do.
              $endgroup$
              – Benjamin Olson
              1 hour ago















            -1












            $begingroup$

            Short Answer:



            For any skill based ability check the player tells the DM what he wants to try to do, the DM then decides on the appropriate skill or ability and she sets a (usually secret) number, the DC. The player then rolls a 20-sided die to meet or exceed that number, adding his character’s ability based modifier and (if you are proficient in the skill) proficiency based modifier for that skill to the number he rolls.



            So you add d20 roll + ability modifier + proficiency modifier (if you are proficient in the skill)



            You will usually have the complete modifier for a skill written on your character sheet so that you don't have to think about it too much while playing and just need to adjust it when you reach certain character levels or increase ability scores. So it should really just be a matter of rolling the die, adding a number to it, and telling the DM what you got.



            Details:



            The Number (DC)



            Based on how the DM evaluates the difficulty, she sets a number called the DC. Because this is a game where you can do anything and the DM has to adjust things on the fly, this is usually a fairly arbitrary number based on “what feels reasonable” to them, so you just have to trust that your DM is picking a reasonable one as fairly and carefully as they can. The most typical numbers set by most DMs are probably 5, 10, 15, 20, and 25.



            Some DMs have more elaborate systems for determining the number. If you are playing a published campaign it is also possible that the authors of that have specified DCs for some situations. There are also times when it will be a “contested roll” against another creature’s skill based ability roll. For perception this is often the case when there is a creature using stealth that you might perceive; your roll would have to beat theirs.



            After you succeed or fail on the roll the DM may or may not tell you what the DC was (or whether you succeeded or failed) at her discretion.



            Roll and Modifier



            The DM calls for a roll and specifies what skill you should be using. Each skill has an associated ability (for perception it is Wisdom) and you will get a modifier from this based on whether your ability score is lower, equal to, or higher than ten. For every 2 below ten you get a -1 modifier and for each 2 above you get a +1 modifier. If you have a 10 there is no modifier. So if you have a Wisdom score of 14, for example you would have a +2 modifier.



            Each character also has proficiencies in certain skills based on character creation decisions (background, class, and race). If you are proficient in a skill you get to add your proficiency modifier as well. The proficiency modifier is based on your character level. At level 1 your proficiency is 2, and it increases by 1 every few levels.



            So if a level 1 character with a Wisdom of 12 and proficiency in the perception skill made a perception roll they would add 1 to the roll for ability and 2 for skill proficiency to their total score. So if they rolled an 11 it would count as 14. If the DC was 14 or lower they succeed. If it was 15 or higher they fail.



            Occasionally the DM will have you make a “straight ability check” when no skill quite fits for what you are doing, in which case you just roll and add the ability modifier without worrying about skills.



            This is all much easier once you have your character sheet set up correctly as it will tell you the total to add for each skill.



            Various classes have special rules about skill rolls (particularly Rogues and Bards), but you’ll learn those as you go if they apply.



            20s and 1s



            A very common house rule (possibly the most common of any kind) is that a natural (before adding modifiers) roll of 20 on the die is an automatic success, and a roll of 1 is an automatic failure. At many tables 20 often means a particularly spectacular success and 1 a particularly spectacular failure. But, technically, according to official rules 1s and 20s only have effects like this for attacks and death saving throws.



            Passive Perception



            In some situations the DM will use your “passive perception” for whether you notice something without actively looking for things. This number will equal 10 + the ability and proficiency modifiers. As long as your DM knows what your passive perception is you shouldn’t have to worry about it.






            share|improve this answer











            $endgroup$








            • 1




              $begingroup$
              Youve got a lot of excellent and accurate information, but you need to cite your references for each point.
              $endgroup$
              – NautArch
              1 hour ago










            • $begingroup$
              @NautArch In this case that seems roughly on the level of needing to cite page 1 of the PHB for the proposition that "Dungeons and Dragons is a roleplaying game", but I'll see what I can do.
              $endgroup$
              – Benjamin Olson
              1 hour ago













            -1












            -1








            -1





            $begingroup$

            Short Answer:



            For any skill based ability check the player tells the DM what he wants to try to do, the DM then decides on the appropriate skill or ability and she sets a (usually secret) number, the DC. The player then rolls a 20-sided die to meet or exceed that number, adding his character’s ability based modifier and (if you are proficient in the skill) proficiency based modifier for that skill to the number he rolls.



            So you add d20 roll + ability modifier + proficiency modifier (if you are proficient in the skill)



            You will usually have the complete modifier for a skill written on your character sheet so that you don't have to think about it too much while playing and just need to adjust it when you reach certain character levels or increase ability scores. So it should really just be a matter of rolling the die, adding a number to it, and telling the DM what you got.



            Details:



            The Number (DC)



            Based on how the DM evaluates the difficulty, she sets a number called the DC. Because this is a game where you can do anything and the DM has to adjust things on the fly, this is usually a fairly arbitrary number based on “what feels reasonable” to them, so you just have to trust that your DM is picking a reasonable one as fairly and carefully as they can. The most typical numbers set by most DMs are probably 5, 10, 15, 20, and 25.



            Some DMs have more elaborate systems for determining the number. If you are playing a published campaign it is also possible that the authors of that have specified DCs for some situations. There are also times when it will be a “contested roll” against another creature’s skill based ability roll. For perception this is often the case when there is a creature using stealth that you might perceive; your roll would have to beat theirs.



            After you succeed or fail on the roll the DM may or may not tell you what the DC was (or whether you succeeded or failed) at her discretion.



            Roll and Modifier



            The DM calls for a roll and specifies what skill you should be using. Each skill has an associated ability (for perception it is Wisdom) and you will get a modifier from this based on whether your ability score is lower, equal to, or higher than ten. For every 2 below ten you get a -1 modifier and for each 2 above you get a +1 modifier. If you have a 10 there is no modifier. So if you have a Wisdom score of 14, for example you would have a +2 modifier.



            Each character also has proficiencies in certain skills based on character creation decisions (background, class, and race). If you are proficient in a skill you get to add your proficiency modifier as well. The proficiency modifier is based on your character level. At level 1 your proficiency is 2, and it increases by 1 every few levels.



            So if a level 1 character with a Wisdom of 12 and proficiency in the perception skill made a perception roll they would add 1 to the roll for ability and 2 for skill proficiency to their total score. So if they rolled an 11 it would count as 14. If the DC was 14 or lower they succeed. If it was 15 or higher they fail.



            Occasionally the DM will have you make a “straight ability check” when no skill quite fits for what you are doing, in which case you just roll and add the ability modifier without worrying about skills.



            This is all much easier once you have your character sheet set up correctly as it will tell you the total to add for each skill.



            Various classes have special rules about skill rolls (particularly Rogues and Bards), but you’ll learn those as you go if they apply.



            20s and 1s



            A very common house rule (possibly the most common of any kind) is that a natural (before adding modifiers) roll of 20 on the die is an automatic success, and a roll of 1 is an automatic failure. At many tables 20 often means a particularly spectacular success and 1 a particularly spectacular failure. But, technically, according to official rules 1s and 20s only have effects like this for attacks and death saving throws.



            Passive Perception



            In some situations the DM will use your “passive perception” for whether you notice something without actively looking for things. This number will equal 10 + the ability and proficiency modifiers. As long as your DM knows what your passive perception is you shouldn’t have to worry about it.






            share|improve this answer











            $endgroup$



            Short Answer:



            For any skill based ability check the player tells the DM what he wants to try to do, the DM then decides on the appropriate skill or ability and she sets a (usually secret) number, the DC. The player then rolls a 20-sided die to meet or exceed that number, adding his character’s ability based modifier and (if you are proficient in the skill) proficiency based modifier for that skill to the number he rolls.



            So you add d20 roll + ability modifier + proficiency modifier (if you are proficient in the skill)



            You will usually have the complete modifier for a skill written on your character sheet so that you don't have to think about it too much while playing and just need to adjust it when you reach certain character levels or increase ability scores. So it should really just be a matter of rolling the die, adding a number to it, and telling the DM what you got.



            Details:



            The Number (DC)



            Based on how the DM evaluates the difficulty, she sets a number called the DC. Because this is a game where you can do anything and the DM has to adjust things on the fly, this is usually a fairly arbitrary number based on “what feels reasonable” to them, so you just have to trust that your DM is picking a reasonable one as fairly and carefully as they can. The most typical numbers set by most DMs are probably 5, 10, 15, 20, and 25.



            Some DMs have more elaborate systems for determining the number. If you are playing a published campaign it is also possible that the authors of that have specified DCs for some situations. There are also times when it will be a “contested roll” against another creature’s skill based ability roll. For perception this is often the case when there is a creature using stealth that you might perceive; your roll would have to beat theirs.



            After you succeed or fail on the roll the DM may or may not tell you what the DC was (or whether you succeeded or failed) at her discretion.



            Roll and Modifier



            The DM calls for a roll and specifies what skill you should be using. Each skill has an associated ability (for perception it is Wisdom) and you will get a modifier from this based on whether your ability score is lower, equal to, or higher than ten. For every 2 below ten you get a -1 modifier and for each 2 above you get a +1 modifier. If you have a 10 there is no modifier. So if you have a Wisdom score of 14, for example you would have a +2 modifier.



            Each character also has proficiencies in certain skills based on character creation decisions (background, class, and race). If you are proficient in a skill you get to add your proficiency modifier as well. The proficiency modifier is based on your character level. At level 1 your proficiency is 2, and it increases by 1 every few levels.



            So if a level 1 character with a Wisdom of 12 and proficiency in the perception skill made a perception roll they would add 1 to the roll for ability and 2 for skill proficiency to their total score. So if they rolled an 11 it would count as 14. If the DC was 14 or lower they succeed. If it was 15 or higher they fail.



            Occasionally the DM will have you make a “straight ability check” when no skill quite fits for what you are doing, in which case you just roll and add the ability modifier without worrying about skills.



            This is all much easier once you have your character sheet set up correctly as it will tell you the total to add for each skill.



            Various classes have special rules about skill rolls (particularly Rogues and Bards), but you’ll learn those as you go if they apply.



            20s and 1s



            A very common house rule (possibly the most common of any kind) is that a natural (before adding modifiers) roll of 20 on the die is an automatic success, and a roll of 1 is an automatic failure. At many tables 20 often means a particularly spectacular success and 1 a particularly spectacular failure. But, technically, according to official rules 1s and 20s only have effects like this for attacks and death saving throws.



            Passive Perception



            In some situations the DM will use your “passive perception” for whether you notice something without actively looking for things. This number will equal 10 + the ability and proficiency modifiers. As long as your DM knows what your passive perception is you shouldn’t have to worry about it.







            share|improve this answer














            share|improve this answer



            share|improve this answer








            edited 1 hour ago

























            answered 1 hour ago









            Benjamin OlsonBenjamin Olson

            4796




            4796







            • 1




              $begingroup$
              Youve got a lot of excellent and accurate information, but you need to cite your references for each point.
              $endgroup$
              – NautArch
              1 hour ago










            • $begingroup$
              @NautArch In this case that seems roughly on the level of needing to cite page 1 of the PHB for the proposition that "Dungeons and Dragons is a roleplaying game", but I'll see what I can do.
              $endgroup$
              – Benjamin Olson
              1 hour ago












            • 1




              $begingroup$
              Youve got a lot of excellent and accurate information, but you need to cite your references for each point.
              $endgroup$
              – NautArch
              1 hour ago










            • $begingroup$
              @NautArch In this case that seems roughly on the level of needing to cite page 1 of the PHB for the proposition that "Dungeons and Dragons is a roleplaying game", but I'll see what I can do.
              $endgroup$
              – Benjamin Olson
              1 hour ago







            1




            1




            $begingroup$
            Youve got a lot of excellent and accurate information, but you need to cite your references for each point.
            $endgroup$
            – NautArch
            1 hour ago




            $begingroup$
            Youve got a lot of excellent and accurate information, but you need to cite your references for each point.
            $endgroup$
            – NautArch
            1 hour ago












            $begingroup$
            @NautArch In this case that seems roughly on the level of needing to cite page 1 of the PHB for the proposition that "Dungeons and Dragons is a roleplaying game", but I'll see what I can do.
            $endgroup$
            – Benjamin Olson
            1 hour ago




            $begingroup$
            @NautArch In this case that seems roughly on the level of needing to cite page 1 of the PHB for the proposition that "Dungeons and Dragons is a roleplaying game", but I'll see what I can do.
            $endgroup$
            – Benjamin Olson
            1 hour ago










            Mournblade is a new contributor. Be nice, and check out our Code of Conduct.









            draft saved

            draft discarded


















            Mournblade is a new contributor. Be nice, and check out our Code of Conduct.












            Mournblade is a new contributor. Be nice, and check out our Code of Conduct.











            Mournblade is a new contributor. Be nice, and check out our Code of Conduct.














            Thanks for contributing an answer to Role-playing Games Stack Exchange!


            • Please be sure to answer the question. Provide details and share your research!

            But avoid


            • Asking for help, clarification, or responding to other answers.

            • Making statements based on opinion; back them up with references or personal experience.

            Use MathJax to format equations. MathJax reference.


            To learn more, see our tips on writing great answers.




            draft saved


            draft discarded














            StackExchange.ready(
            function ()
            StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2frpg.stackexchange.com%2fquestions%2f143763%2fhow-does-the-math-work-for-perception-checks%23new-answer', 'question_page');

            );

            Post as a guest















            Required, but never shown





















































            Required, but never shown














            Required, but never shown












            Required, but never shown







            Required, but never shown

































            Required, but never shown














            Required, but never shown












            Required, but never shown







            Required, but never shown







            Popular posts from this blog

            How does Billy Russo acquire his 'Jigsaw' mask? Unicorn Meta Zoo #1: Why another podcast? Announcing the arrival of Valued Associate #679: Cesar Manara Favourite questions and answers from the 1st quarter of 2019Why does Bane wear the mask?Why does Kylo Ren wear a mask?Why did Captain America remove his mask while fighting Batroc the Leaper?How did the OA acquire her wisdom?Is Billy Breckenridge gay?How does Adrian Toomes hide his earnings from the IRS?What is the state of affairs on Nootka Sound by the end of season 1?How did Tia Dalma acquire Captain Barbossa's body?How is one “Deemed Worthy”, to acquire the Greatsword “Dawn”?How did Karen acquire the handgun?

            Личност Атрибути на личността | Литература и източници | НавигацияРаждането на личносттаредактиратередактирате

            A sequel to Domino's tragic life Why Christmas is for Friends Cold comfort at Charles' padSad farewell for Lady JanePS Most watched News videos